Parts

The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. - Updated distinctive Zipp cosmetics - 70mm reach and 128mm drop allows for a low and aero drops position - Internal cable routing is easy with Rapid Route - Lifetime warranty

The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include 9mm x 100mm QR dropouts and brake mount for short-reach caliper rim brakes, to easily accommodate standard road wheels. The fork offers low weight, precise handling and tire clearance for up to 700 x 28c tires. - 9mm x 100mm spacing - For use with short reach caliper rim brakes - 700 x 28c max recommended tire size - ASTM Condition 1 - For use on paved surfaces - Includes Whisky Parts Co. compression plug - Axle to Crown Length: 367 mm - Brake Mount (Fork): Short Reach Caliper (39mm - 49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 9mm x 100mm - Material: Carbon - Offset: 43 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 300 mm - Weight: 370 g - Wheel Size: 700c , 650b - Maximum Tire Clearance (Fork): 30c

Expand your choice of cranks for use in BB86/BB92/BB91/BB71-41/BB107 frames. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks (FSA BB386EVO, Rotor 3d+, RaceFace Next SL, e.thirteen) cranks in your frame. These bearings fit directly in frames with 41mm ID smooth bore bottom bracket shells.You must use 30mm spindle cranksets with spindle lengths longer than 104mm. - Bearings: Enduro Dual-Row ABEC-3 - Dimensions: 41mm x 30mm (42mm flange OD) - Color: silver - Bottom Bracket/Frame Interface: BB86, BB92, BB91, BB71-41, BB107/104 - Bottom Bracket Shell Width (mm): 86.5mm - 107mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: BB386EVO, BB30 longer than 104mm - Crank Spindle Diameter: 30mm - Weight: 89g

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

Performance Creativity For the aficionados and the geeks and the fanboys and the freaks, a custom-painted crank is a place of pride. A painted hammer. A beautiful ax. Troy Lee and his team channeled the future of camo to design these cranks, and the future in the stiff, durable world of SRAM cranks is looking exceptionally bright. Specifications: - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Chainring Size: 32 - Crank Arm Length: 165mm, 170mm, 175mm - Chainline: 52.0mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD: Direct Mount (DM) - Crank Arm Material: Carbon

Specialized's Command Post IRCC, offers Cruiser Control technology. With ten micro-adjust positions, you'll always be able to find just the right saddle height for descending like Gwin or climbing like Sauser. - Patented mechanical locking system with the addition of Cruiser Control Technology. - Cruiser Control technology features added positions in the cruiser control range. - Bonded lightweight aluminum micro-adjustable “alien” style head. - Dual-keyway system eliminates saddle wiggle. - Energized triple-lip wiper prevents contamination. - Durable zero-gap, dual-lip x-ring internal seal ensures long-term durability. - Ships with SRL and grip mounted lever.

The Phenom Pro Elaston was designed to allow its outer-edge to conform to your body for a near-custom fit. Lightweight and expertly-tuned for stiffness and efficiency, the Phenom features a rounded, anti-snag tail and the perfect amount of padding for all on- or off-road riding. On this model, we've replaced the traditional PU padding in favor of an Elaston foam construction that's made up of small beads that are expanded into the foam. The result? The feeling off sitting on 1,000 miniature pillows rather than one piece of foam. And to keep the comfort coming, we rely on our extra-wide, elongated Body Geometry channel and short nose to provide you with proper sit bone support. - Patented Body Geometry design is lab-tested to assure blood flow to sensitive arteries. - Elaston foam provides unrivaled comfort and support on longer rides. - Low-friction panels on the nose and tail improve pedaling efficiency and mobility while moving on and off the saddle. - Ultra-light oversized FACT carbon rails. - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails. - Size 143mm / Weight 207g - Size 155mm / Weight 219g

The new Power Arc Pro expands on the success of our original Power saddle. It features the same channel and length as the original, but where it differs is in its titanium rails versus the carbon fiber found on the S-Works. But this means that it still features a stiff, FACT carbon fiber shell and lightweight EVA padding. If you're already a Power loyalist, this iteration features a curved Body Geometry shape that better contours to your body. What does this mean for your ride? It means that you'll feel as if you're “in the saddle" and not on it. And ultimately, this equates to greater comfort and superior performance in all seated positions, whether you're a man or woman. We've also replaced the traditional PU padding for an Elaston foam construction that's made up of small beads that are expanded into the foam. The result? The feeling off sitting on 1,000 miniature pillows rather than one piece of foam. And to keep the comfort coming, we rely on our extra-wide, elongated Body Geometry channel and short nose to provide you with proper sit bone support. - Patented Body Geometry design is lab-tested for both men and women to ensure blood flow to sensitive arteries. - Stiff FACT carbon fiber shell is tuned for support and ride compliance. - Elaston foam provides unrivaled comfort and support on longer rides. - Lightweight and durable hollow titanium rails. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.

The Perfect Reflection of You. The Power Expert with Mirror saddle combines comfort and performance for riders whether they are podium-seeking crushers or everyday cruisers. The Body Geometry designed Power shape with high-tech Mirror inserts provide sit bone-friendly support road to mountain uses. ATTAINABLE TECH: The Power Expert with Mirror saddle provides riders with a significant reduction in pain-causing pressure when compared to it's foam counterpart, the Power Comp Saddle. Inside the saddle are two tear drop shaped Mirror Technology inserts that target sit bone pressure. Riders around the world will be stoked that the new Expert level Power Saddle with Mirror technology make these benefits more attainable than ever. POWER SHAPE: Our beloved Power shape, with a cutout. The patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. Is it a road saddle? Mountain saddle? In short, yes. We hate to say a product works "for everything", but it does. We believe that performance-in saddle speak-means comfort. And whatever shape and material suits you, will be your highest performing saddle. MIRROR TECHNOLOGY: We developed Mirror technology by 3D printing from a liquid polymer to be a perfect reflection of you. Mirror technology allows for infinite density tuning with a single material, but any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retul data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. ANY BODY, EVERY RIDE: We know that every body is different, but the issues facing riders in the saddle are the same—sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and blood flow studies, Body Geometry and Mirror Saddles don't just promise to solve these issues for people-we've proven they do. Plus, this is the first saddle with Mirror technology in additional sizes (130 and 168). ALL AROUND USE: The Power Expert With Mirror saddle uses the same 3D printed technology as the S-Works Power with Mirror except the Expert has 4-way stretch cover to keep mud and debris out of the nooks and crannies of the Mirror lattice. That dirt-shedding feature, plus super durable, yet light weight hollow titanium rails make the Power Expert with Mirror the smart choice for gravel and mountain riders, in addition to those who stick to paved surfaces. Web Bullets - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology inserts to provide additinal sit bone relief. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Supportive and lightweight PU foam surrounding the 3D printed inserts. - Size 130mm / Weight: 210g - Size 143mm / Weight: 214g - Size 155mm / Weight: 225g - Size 168mm / Weight: 227g

For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with our Elaston foam construction featuring small beads that are expanded into the foam, the result? The feeling of sitting on 1,000 miniature pillows rather than one piece of foam. Add in a stiff, FACT carbon shell with durable titanium rails and Body Geometry design characteristics you know and love, you can be assured of superior, all-day comfort in any riding position. - Elaston foam provides unrivaled comfort and support on longer rides. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Lightweight and durable hollow titanium rails. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Stiff FACT carbon fiber shell is tuned for support and ride compliance.

Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position. The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before. The bike may be the most sustainable transportation ever created, but we need to do more. The saddle's carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we're building a more sustainable carbon base. With the Power Pro's titanium rails, Mirror technology is now more durable than ever. It's so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It's the perfect reflection of you. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Titanium rails. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Approximate weight: 245g (Size 143mm) - Approximate weight: 251g (Size 155mm)

The S-Works Phenom is a top-of-the-line, lightweight, all-terrain saddle that features a FACT carbon fiber shell that's specifically tuned for the stiffness required of racing. And with a rounded, anti-snag tail and the perfect amount of padding, you'll find it more than ready for all-day rides both on-and off-road. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Super-light, EVA padding for comfort and support on longer rides. Ultra-light, strong, and oversized FACT carbon rails.

The Specialized S-Works Power Arc saddle expands on the success of the original S-Works Power saddle, while featuring the same channel and length as the original. This means that it features a stiff, FACT carbon fiber shell and rails and lightweight EVA padding. The shape of the saddle is also designed to provide ample sit bone support, and this has been coupled with a shorter-than-usual nose section to keep pressure off of soft tissue while riding in aggressive positions. They even took this ideology a step further via an extra wide and elongated Body Geometry channel that's been proven through blood flow testing and pressure mapping to reduce numbness and pressure on unwanted areas. And while this all seems familiar if you're already a Power loyalist, this iteration features a curved Body Geometry shape that better contours to your body. What does this mean for your ride? It means that you'll feel as if you're “in the saddle," not on it. And ultimately, this equates to greater comfort and superior performance in all seated positions, whether you're a man or woman. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries. - Stiff FACT carbon fiber shell is tuned for support and ride compliance. - Super-light EVA padding for comfort and support on longer rides. - Ultra-light, strong, and oversized FACT carbon rails. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight: 141g - Size 155mm / Weight: 145g

Specialized's ultra-light S-Works Power saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra-wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries - Stiff FACT carbon fiber shell tuned for support and ride compliance - Super-light PU padding for comfort and support on longer rides - Ultra-light and strong oversized FACT carbon rails - Tough, light and water-resistant cover - Level 1 padding: Lightest level of padding; most direct connection to the bike - SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions - Weight: 143g (143mm), 155g (155mm)

The S-works Power Saddle with Mirror technology is the perfect reflection of you. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind honeycomb structure that offers superior sit-bone support and comfort. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light, strong, and oversized FACT carbon rails - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 190g - Size 155mm / Weight: 194g - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.

We’re redefining comfort and performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened decades ago with the introduction of foam. To develop a next-generation saddle, we had to look beyond foam and develop a next-generation technology. The S-Works Romin EVO Saddle with Mirror is the future. We developed Mirror technology by 3D printing from liquid polymer to perfectly reflect your anatomy. This revolutionary process creates a complex honeycomb structure that allows us to infinitely tune the material’s density in a way impossible with foam. The result is a patent-pending matrix of 16,000 struts and 7,799 nodes, each of which can be tuned individually. And when you combine this technology with our extremely lightweight S-Works Romin EVO saddle, with its flex-tuned FACT carbon shell and ultra-light rails, you get a high-performance saddle that's designed to help you perform at your best. It features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort for your unique position. - Patented Body Geometry design is lab-tested for both men and women to assure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind honeycomb structure that offers superior sit-bone support and comfort. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light, strong, and oversized FACT carbon rails. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.

A high performance bar, ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. - Bar Width (center-to-center): 36/38/40/42/44cm - Clamp Diameter: Oversized 31.8mm - Ergonomic top perch alleviates pressure on hands. - FACT carbon construction offers an optimized blend of durability and light weight. - Front of bar optimized for dual-cable routing. - Shallow Bend Drop: 123mm drop x 75mm reach - Shallow bend drop design. - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls. - Weight: 200g (42cm)

This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options—0mm and 20mm. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt. - FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7. - Setback: 0/20mm. - Sleek Di2 integration hides the Di2 junction box inside.

- Aerodynamic FACT carbon construction that’s compatible with the 2019 Venge - Sleek Di2 integration hides the Di2 junction box inside - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt

For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. We spent countless hours performing research and prototyping in order to give you the comfort that you've been rightfully longing for. With our patented design, Mimic technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with our extremely lightweight S-Works Power saddle, with its stiff, FACT carbon shell and rails, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light, strong, and oversized FACT carbon rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Weight: 170g

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition. - Designed for use with 10-Speed asymmetrical Shimano road chains: CN-7901, CN-6711 and CN-5701

- Rider Tuned Gearing - Wider Gear Combination: 11 – 28T/12 – 28T/11 – 30T (New Gear Combination) - Closer Gear Combination: 11 – 25T/12 – 25T - Lightweight - CFRP & Alloy Spider Arm, 5 Titanium Sprockets - Gear Combination: 11 – 25T, 11 – 28T, 11 – 30T (New Gear Combination), 12 – 25T, 12 – 28T

- Increased Overall Braking Performance - Integrated Sleek Low-Profile Caliper Design - Comfortable Riding With Wider Tire On Rough Road - Better Clearance With Wider Tire - Compatible With 28C Tire Size - Intuitive Braking Control - Smooth And Light Operation - SLR-EV Technology

- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included - Standard (52mm) - Wide (56mm)

The uninterrupted shifting experience of the Shimano Dura-Ace R9200 12-speed cassette range lets you climb, sprint, and push your limits without stopping to think about your next gear change. Larger driving cogs maximize drivetrain efficiency and create compatibility with both Shimano 11 and 12-speed freehub bodies. Shimano HYPERGLIDE+ technology is integrated to provide seamless shifts both up and down the gear range. - Faster, seamless shifts under maximum pedaling load - Refined 12 step gear combination provides peak efficiency and accelerating performance for every situation - Compatible with 12-speed and road 11-speed freehub body

Big air, pure speed, and total concentration: the DH world in a nutshell. It's a world where line choices are made in the blink of an eye, absolute faith in your gear is a must, and Shimano's Saint Crankset is ready to answer the call every time. Ultra-wide bottom bracket bearing spacing and hollow-forged crank arms are used for maximum rigidity and strength under demanding conditions, and a steel pedal insert adds even more burl. A single chainring keeps things simple and durable up front so you can focus on the ride, and not a dropped chain. See you at the bottom. - English threaded Shimano Hollowtech II BB included

Shimano Ultegra R8000 dual control levers. - Greater reach adjust range - Quick and intuitive rear shifting operation with redesigned internal shifting unit - Even lighter front shifting when paired with redesigned FD-R8000 - 2x11-speed - Model Number: ST-R8000 - Series: Ultegra - Shift Cable Casing: OT-SP41 - Shift Cable: Polymer coated - Average Weight: 220 grams

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

Shimano Ultegra ST-R8070 Di2 hydraulic disc brake dual control levers. - Intuitive shifting operation - Updated features and more defined click feeling - Clearer separation between shift buttons support quick and precise shifting while operating with thick gloves - Customizable functionality to match the rider's style - Each switch has the option for multi-shift ON or OFF - E-TUBE PROJECT - Programmable function of ST top button remote switch for third party cycle computer and shifting - Greater rider control in all conditions - Hydraulic disc brake provides the next stage of control - Small bracket size improves ergonomics - Customize each SW for multi-shift on or off per SW through E-tube project App. - Greater reach adjust range and free stroke adjuster - Lightweight race-ready materials - More quick and precise shifting while operating with thick gloves - 2x11-speed - Average Weight: 180 grams

Shimano Ultegra ST-R8020 mechanical shift and hydraulic brake dual control lever and BR-R8070 flat-mount brake caliper. This dual control lever features Servowave brake lever technology, making initial pad travel very fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control. - The double hydraulic brake/mechanical shift lever is equipped with a reach adjust mechanism, meaning the distance from the handlebar grip to the lever can be adjusted to suit any hand size - Servowave brake technology means instant response and maximum modulation. - The Ultegra BR-R8070 flat-mount caliper is designed with one way bleeding technology which prevents air from entering the system and is easy and clean to maintain - Caliper also features Shimano's Ice Technology to reduce heat buildup for constant, stable braking