Cables

Hydraulic hose with banjo fitting for TRP brakes.

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black

Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Black - 2000mm hose length - Compatible with SRAM road hydraulic disc brakes

Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's flexible shift housing is used for the rear housing segment with Shimano Shadow-type road rear derailleurs to give optimum shifting performance and the flexibility needed for wheel installation and removal. - For use with Shimano Shadow type road rear derailleurs, such as RD-R9100, RD-R8000, and RD-R7000. - 4mm low-compression CGX-SL housing construction. - Includes 10x sealed end caps and 10x 4mm/4mm housing connectors

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's Mickey Adjusting Barrels are quality adjusters that mount to most road frames. They make it easy to fine-tune your shift cable tension by hand for optimum shifting performance.

Mountain Elite Sealed shift cable & housing sets completely protect your system against dirt, mud, and debris. A fully continuous liner with upgraded Speed-Lube lubricant ensures that protection against the elements does not come at the expense of top level performance. - Polymer coated cables dramatically reduce friction - Speed-Lube ultra slick lubricant protects cable to ensure consistent performance - Sealed system prohibit grime from contaminating system and compromising shift quality - SRAM/Shimano compatible cable ends are one sided for easy installation Kit includes: - Front Cable Length: 1500mm - Rear Cable Length: 2300mm - Housing Length: 3200mm - 2 Grub Seals - 4 Open Brass End Caps - 7 Open Alloy End Caps for 5mm Housing - 2 Non-Crimp Cable Tips - 2 3G Tube Tops - 2 Rotating Hooks

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hope brakes and includes enough hardware for one bicycle. Compatible with the following Hope brakes: - Tech 3 X2 - E4 - V4 - Race Evo X2 - E4 - M4 - Tech Evo X2 - M4 - V2 - Race X2 - Tech X2 - M4 - V2 - Mini - Mini Trials - Mono Mini - Mono M4 - 6TI - Moto V2 - M6 - Hope Banjo

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Road Elite Sealed brake cable and housing sets completely protect your system against dirt, mud, and debris. A fully continuous liner with upgraded Speed-Lube lubricant ensures that protection against the elements does not come at the expense of top level performance. - Polymer coated cables dramatically reduce friction - Full seals keep out corrosive agents - SRAM/Shimano road compatible cable end Kit includes: - Front Cable Length: 850mm - Rear Cable Length: 1650mm - Housing Length: 1700mm - 2 Grub Seal - 2 Open Brass End Caps - 4 Open Alloy End Caps - 2 Non-Crimp Cable Tips - 2 3G Tube Tops - 2 Rotating Hooks

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Sport shift housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better shifting performance - Linear strand construction for compressionless performance - Appropriate for Teflon coated cables as well as steel and galvanized - 4.0mm outer diameter solid colors; 4.5mm OD braided colors - Length: 10m

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake

Keep housing, hose, and electronic wires tidy with Jagwire Wire Hooks. - 4mm / 5mm hooks - Connects 4mm shift housing, dropper housing, or E-bike control wire to 5mm brake housing or hydraulic hose - Pack of 4 hooks

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

- Shop dispenser of aluminum cable end caps to prevent cable fray - 500 pieces - 1.6mm

- Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag - Lead and Dioxin free. - 30m - Made in Japan

- Shop dispenser of cable end ferrules - 100 ferrules per bottle - For use with 4mm housing

- Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag - Lead and Dioxin free - Made in Japan

- Shop dispenser of cable end ferrules - Chrome color - 100 ferrules per bottle

- All Yokozuna cables have high-grade raw materials flexibility strength tight construction and excellent quality control - Premium stainless steel for greater durability - Standard cables are high-strength die-drawn steel cables with proprietary Sn50 pl - 1700mm

- All Yokozuna cables have high-grade raw materials, flexibility, strength, tight construction, and excellent quality control - Premium stainless steel for greater durability - Standard cables are high-strength die-drawn steel cables with proprietary Sn50 plating that exhibits corrosion resistance superior to a zinc galvanized cable - Made in Japan - 1700mm

Premium quality aluminum cable end crimps to prevent cable fray. Made in Japan

Premium quality aluminum cable end crimps to prevent cable fray. Made in Japan

Two-piece threaded cable tip contains the cable end without crushing it. CNC aluminum, no tools needed to install, reusable.

Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag. - Lead and Dioxin free - Made in Japan

- Aluminum with concave mounting surface - Includes barrel adjusters and mounting bolts - M8

- Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag - Premium stainless steel for greater durability - Lead and Dioxin free. Made in Japan

- All Yokozuna cables have high-grade raw materials, flexibility, strength, tight construction and excellent quality control - Stainless: high-quality die-drawn stainless steel cable - Standard: Sn50/tin-plated - Made in Japan - Length: 1700mm - Diameter: 1.6mm - 100 cables per box

Housing features the Jet Lube process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag. - Cables are premium stainless steel die drawn for smoothness, lead and dioxin free - 1x sets are specifically designed for rear derailleur only applications. 1x sets also work on many mechanical dropper posts - Set includes: (1) 2000mm piece of 4mm housing, (1) 1.1mm or 1.2mm x 2100mm cable, (4) ferrules, and (2) crimps

High-octane cable systems for today's brake and drivetrain systems. - Features RapidWire compressionless technology and Jet-Lube housing - Rapidwire brake housing boosts braking performance on the road, linear-pull, and mechanical disc brake applications - Sets include cable and housing for front and rear brake applications. - Dual-ended cables with road and MTB options - Made in Japan

High-octane cable systems for today's brake and drivetrain systems. - Features RapidWire compressionless technology and Jet-Lube housing - Rapidwire brake housing boosts braking performance on the road, linear-pull, and mechanical disc brake applications - Sets include cable and housing for both front and rear brake and derailleur applications - Universal kit contains heads for Shimano/SRAM Road or Mountain levers - For Campagnolo brakes, you need to supply your own cables - Made in Japan

- All Yokozuna cables have high-grade raw materials flexibility strength tight construction and excellent quality control - Premium stainless steel for greater durability - Standard cables are high-strength die-drawn steel cables with proprietary Sn50 plating that exhibits corrosion resistance superior to a zinc galvanized cable - Made in Japan - 2100mm

Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: brass - Bottle of 50pcs

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5. 75mm - Overall length: 12. 7mm - Material: brass - Bottle of 50pcs

Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

- Aluminum cable crimps to prevent frayed cables - 1.2mm for shift cables or 1.6mm for brake cables - Silver aluminum - 250-count bottle

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

The Metallic Braid Brake Kit adds the perfect touch of class to any randonneur, touring, and city bike. Additionally, the housing is more compression resistant and tougher than plastic-coated housing. The cable housing has a thin clear plastic sheath to protect your bike's paint. 5mm diameter housing. These derailleur cable kits feature full length, high-quality lined housing for crisp shifting and easy installation. One bike's worth, includes: - 1x 4000mm lengths lined SIS-compatible 5mm diameter housing - 1x 2500mm length stretched stainless steel slick pre-stretched cable - 1x 2300mm length stretched stainless steel slick pre-stretched cable - 4 ferrules - 2 tips

Hydraulic hose with banjo fitting for TRP brakes.

Shimano, SP41, 4mm Shifter housing, 50m

- Brake housing for polymer coated brake cables - Refer to Documents and links to find the right product

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert