Filter By:
Forks

$375.00
The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include 9mm x 100mm QR dropouts and brake mount for short-reach caliper rim brakes, to easily accommodate standard road wheels. The fork offers low weight, precise handling and tire clearance for up to 700 x 28c tires.
- 9mm x 100mm spacing
- For use with short reach caliper rim brakes
- 700 x 28c max recommended tire size
- ASTM Condition 1 - For use on paved surfaces
- Includes Whisky Parts Co. compression plug
- Axle to Crown Length: 367 mm
- Brake Mount (Fork): Short Reach Caliper (39mm - 49mm)
- Color: Black
- Crown Race: 30
- Defined Color: Black
- Front Axle: 9mm x 100mm
- Material: Carbon
- Offset: 43 mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Straight
- Steerer Tube Length (mm): 300 mm
- Weight: 370 g
- Wheel Size: 700c , 650b
- Maximum Tire Clearance (Fork): 30c

$17.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

$268.00 - $376.00
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

$268.00
The RockShox Recon Silver: a fork with the performance that'll help you beat your riding buddies without beating up your checking account. Sturdy 32-millimeter stanchions, stiff, forged aluminum crown, and dependable Solo Air spring make Recon Silver the fork you've been looking for. Solo Air lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously, and the Turn Key oil damping system offers external rebound adjustment and compression lockout for on-the-trail adjustability.
- PopLoc compatible
- 2.4" (62mm) maximum tire width
- Crown Race: 30mm
- Offset: 40mm
- Steerer Tube Length: 265mm
- Positive Spring: Air
- Negative Spring: Air
- Travel: 100mm
- Wheel Size: 26"
- Stanchion Diameter: 32mm

$1,001.00
A striking balance of low weight and exceptional downhill performance, the SID finds a new level of confidence and defines what modern XC race bikes are capable of. The SID Ultimate is built with more travel, an all-new stiff 35mm chassis that features our lightest damper to date, and the new Charger Race Day. This race-ready package also includes the redesigned DebonAir air spring, tuned specifically for the demands of XC riders. Our friends at SKF and Maxima Plush Fluids come along for the ride, providing long-lasting fork performance and improved overall suspension feel. Lighter and more capable than ever before, SID will get you to the finish line faster.
Features
- New 35mm chassis is the perfect blend of low weight and stiffness for the modern XC bike
- New Charger Race Day Damper - our lightest production damper with rock-solid lockout
- New DebonAir air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control
- New Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
- Maxima Plush damping fluid reduces friction and silences damper noise
- Machined/anodized crown
- 2-bolt mounts to fit a short fender (RockShox fender sold separately)
- Ultimate foil graphics package

$699.99
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers.
- Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included)
- Noise management system for near silent performance
- Integrated air assist for progressivity and bottom-out control
- External preload adjuster to dial-in sag and firmness off the top
- Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers
- Additional springs sold separately to fine-tune and adjust for rider preference
- Rake: 44mm

$1,039.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Genuine Kashima Coating on upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT4 damper and FLOAT air spring

$1,019.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$1,069.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$24.00 - $29.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork

$435.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Axle to Crown Length: 392.2mm
- Brake Mount (Fork): Post Mount 140mm
- Front Axle: 10mm x 100mm
- Material: Carbon
- Maximum Tire Clearance (Fork): 48
- Offset: 47mm
- Rotor Size (Fork): 160mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Tube Length (mm): 300mm
- Wheel Size: 700c

$425.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
- 100 x 12mm thru-axle
- 1-1/8 – 1.5" tapered steerer
- 45mm offset

$350.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.

$525.00
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for.
- 12mm thru-axle, 100mm spacing
- Designed for flat-mount disc brakes
- Fender eyelets on outside of fork leg for easy mounting
- 700c x 42mm or 650B x 50mm max recommended tire size
- ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches
- Includes thru-axle and Whisky Parts Co. compression plug

$565.00
Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup.
- 12mm thru-axle, 100mm spacing
- 700c x 42mm or 650b x 50mm max recommended tire size
- ASTM Condition 3 – For rough off-road riding and jumps less than 24
- Includes thru-axle and Whisky Parts Co. compression plug
- Brake Mount: Flat Mount 140
- Material: Carbon
- Weight: 526g
- Steerer Type: Tapered
- Offset/Rake: 45
- Steerer Tube Length: 350mm
- Axle to Crown Length: 395mm
- S.H.I.S. Crown Race Diameter: 40
- S.H.I.S. Stem Clamp Diameter: 28.6
- Fork Minimum Rotor Size: 140
- Fork Maximum Rotor Size: 160

$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch

$565.00
The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders.
- 12 x 100mm thru-axle
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 700c x 51mm or 650b x 61 mm max tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12-inches
- Includes thru axle and Whisky Parts Co. compression plug
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more.
- 15mm thru-axle with 110mm Boost spacing
- Post-style brake mount
- 1.5" tapered carbon steerer
- Two sets of Three-Pack mounts
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"

$525.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable.
- 12mm Thru Axle
- Flat Mount Disc Brake
- Tapered Steerer Tube
- 700x38c/650x47c clearance

$525.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance.
- 1-1/4-inch Tapered steerer tube
- 12mm thru-axle, 100mm spacing
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 700 x 30c max recommended tire size
- Includes thru axle and Whisky Parts Co. compression plug

$139.99
Built to go fast and high, the Patrol fork uses 4130 "M2" chromoly tubing and features CNC machined micro dropouts that match perfectly with the dropouts on the Patrol frame. If you're looking for a strong, dependable fork with classic styling, look no further.
- Light, tapered legs
- 7075-T6 alloy top bolt, M24 thread
- Integrated crown race designed to work with integrated headsets with a 45deg bearing
- Please Note: WTP does not recommend the use of pegs on the Patrol fork

$150.99 - $175.99
WeThePeople's Battleship Fork is strong and technical with super thick investment cast dropouts that are designed to be the perfect partner for WTP's most popular frame.
- Super short 24mm offset street fork
- Invest cast dropouts and fork end, designed to work flawlessly with plastic pegs and hub guards
- Incredibly strong design
- 7075-T6 alloy top bolt, M24 thread
- Tapered, triple butted fork blades
- Integrated crown race, designed to work with integrated headsets with a 45-degree bearing

$130.00
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends.
- Axle-to-crown: 420mm
- Offset: 43
- Steerer: 340mm
- Tire Clearance: 71mm (2.8")
- Weight: 1190g (2.62 lbs)

$130.00
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat.
- Axle-to-crown: 400mm
- Offset: 44mm
- Steerer: 300mm
- Tire Clearance: 700c x 45mm
- Weight: 2.3 lb (1.0kg) uncut

$199.00
The Dinner Fork is non-suspension corrected and accommodates 26", 27.5", and 29" wheel sizes. If you want to run fenders alongside an 8 or 24-Pack style rack, this fork can do that. Hell, it relishes it. To give you even more options for carrying miscellaneous items, we put a set of 3-pack mounts on each fork blade, too.
Run it on your current Surly for a thought-provoking new experience, or throw it on a different rig to unlock some off-road capabilities. A truly versatile piece of cutlery, the Dinner Fork features 100% Surly Chromoly steel construction, 51mm IS disc brake mounts, and clearance for tires up to 26 x 3.0", 27.5 x 2.8", or 29 x 2.2".
Specifications:
- Axle-to-crown: 420mm
- Offset: 50mm
- Steerer: 350mm, 1-1/8" straight
- Tire Clearance: 26 x 3.0" (without fenders); 27.5 x 2.8" (with or without fenders); or 29 x 2.2" (without fenders)
- Weight: 2.75 lb.

$175.00
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it.
Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril.
26 Inch
- Axle-to-crown: 376mm
- Offset: 45mm
- Steerer: 42–54cm frames = 300mm, 1-1/8" straight
- 56–62cm frames = 400mm, 1-1/8" straight
- Tire Clearance: 26 x 2.1" (with or without fenders)
700c
- Axle-to-crown: 390mm
- Offset: 45mm
- Steerer: 56–64cm frames = 350mm, 1-1/8" straight
- Tire Clearance: 700c x 47mm (with or without fenders)

$130.00
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's.
- Axle-to-crown: 468mm
- Offset: 47mm
- Steerer: 260mm, 1-1/8" straight
- Tire Clearance: 29 x 3.0"
- Weight: 3.1 lb (1.4kg) uncut

$175.00
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing.
- Axle-to-crown: 483mm
- Offset: 47mm
- Steerer: 260mm, 1-1/8-inch straight
- Tire Clearance: 26 x 5.25-inch
Page 1 of 7
Next page