Other

Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs

If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm

Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters

These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

Heavy duty bolt-on aluminum seatpost clamp.

Shimano STI lever hoods. - Fits Ultegra ST-6700 levers only

Covers front derailleur mount when running 1x

The Problem Solvers Eccentric Bottom Bracket E46 for PressFit 30 Frames fits frames with 46mm internal-diameter bottom-bracket shells and accepts cranksets with 24mm spindles. The eccentric allows 16mm of fore/aft adjustment for ample chain tensioning. This bottom bracket comes with spacers to fit Hollowtech II, MegaExo and X-Type cranksets. And an adapter kit for GXP cranksets is sold separately (CR0097).

Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.

Zipp Speed Weaponry Aero Bar Parts - Includes 2 replacement pads and Velcro - May be used with the older Vuka Clip and Vuka Aero - Elbow pads embossed with Zipp brand logo

- Rear Derailleur GX 1X11 B Bolt and Limit Screw Kit

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

FSA (Full Speed Ahead) Polycarbonate Headset Stack Spacers

Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean

RockShox 32mm Seal Kit

Complete assemblies of remotes, hoses and fittings for Reverb and Reverb Stealth.

External Reverb and Reverb Stealth parts that can be installed without needing to open the mechanism.

RockShox Rear Shock Parts

Internal components for servicing the Reverb and Reverb Stealth mechanism.

RockShox XLoc Parts

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

- Durable custom-molded plastic guard - Co-molded rubber exterior to help quiet chain-slap noise - Easy installation and removal

The OSPW X for SRAM Eagle AXS features a narrow wide tooth profile to ensure durable chain retention. The 14-tooth upper and 18-tooth lower pulleys reduce chain drag, while the custom-designed carbon fiber pulley cage ensures both durability and light weight. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/Oil: Pulley Oil - Compatibility: SRAM Eagle AXS (Electronic) - Compatibility Cassette: 10-52 tooth max - Spring Tension Settings: 3 - Speed: 12-speed - Discipline: Off-road and Gravity In the box: - A complete OSPW X System for SRAM Eagle AXS - CeramicSpeed Bearing Oil in a 15ml dropper bottle